Autocalave

Suitable for general laboratory use and sterilization. Stainless steel or aluminium vertical body. Pressure range 15 psi. Domed cover can be sealed by joint-less gasket which is clamped to the vessel by wing PSAWts by hinged bolts which engage slotted lugs on rim of the cover. Provided with dial pressure gauge. Spring loaded safety value has threaded cap for pressure adjustment. Supplied complete with plug & cord us suitable to work on 220V AC 50Hz single phase.
Size Diax heightin mm
a) 300x300mm (Seamless)
b) 300x375mm (Jointed)
c) 300x500mm (Jointed

A versatile, electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler & steam jackets made of thick stainless steel. The outer Chamber is made our of thick mild steel/stainless steel. The lid is made out of thick stainless steel plate (Joint less) or gunmetal and can be sealed by a joint less neoprene rubber gasket by wing PSAWts through hinged bolts by engaging slotted lugs on rim of the cover.

Provided with dial pressure gauge, air/steam release cock, spring loaded safety value adjustable to any required point from 10 psi to 20 psi with accuracy ± 3 psi. All autoclaves are fitted with standard accessories, such as, a drain cock, pressure gauge, steam release cock, spring loaded safety value and heating element, but supplied without dressing bins.

OPTIONAL:-
j) Automatic low-water level cut off-device.
ii) Pressure control switch.
iii) Water level arrangement.
iv) Dressing bins for various sizes.

Most useful for sterilizing the loaded material under a steam pressure of 10 to 20 psi (adjustable). It has inner chamber, steam jacket and outer wall made of S.S. duly argon arc welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimize the temperature loss. The lid is made of thick stainless steel and closed by radial type closing arrangement. Fitted with a gasket made up of neoprene rubber, safety value. Drain cock, water inlet, water level indicator, steam release value, pressure gauge, pedal lifting device and S.S. basket. Supplied complete with cord and plug to work on 220/440 volt A.C. Supply. And supplied without dressing bins.

OPTIONAL:-
i) Automatic low-water level cut off-device.
ii) Pressure control switch.
iii) Dressing bins of various size.

Most ideal for any institute or laboratory doing bulk sterilizing and research work. This autoclave has double walled chamber and a boiler and these are mounted on a heavy duty mild steel stand. The inner made of thick stainless steel sheet and outer chamber is made of stainless steel/mild steel sheet. Automatic self closing device to prevent opening of the door while the sterilize is in operation. Stainless steel steam generation unit fitted with easily replaceable heating element. Fitted with pressure control switch. Pressure range 10 to 20psi.

Robust and rigid construction, designed for all type of bulk sterilization which are commonly required in medical, agriculture and pharmaceuticals. This is triple walled with steam jacket and separate boiler. The sterilizer has single place door. Inside and outside are made or stainless steel. All construction are of stainless steel. Complete with dial type thermometer. Pressure control switch.

Note: Please ask for other capacities and size of your requirement.