HomeAbout UsQuality ControlManagement SetupProduct & ServicesProfileContact Us
 
 

Laboratory Plasticware

 
 
Products -> Laboratory Plasticware
 
[1]
 

Beakers

Polylab Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
Material : Polypropylene

CODE NO.

PARTICULARS

LEAST COUNT

PACKING

11101

50 ml

5

12 Pcs

11102

100 ml

5

12 Pcs

11104

250 ml

10

12 Pcs

11105

500 ml

10

12 Pcs

11106

1000 ml

25

6 Pcs

11107

2000 ml

250

6 Pcs


See Enlarge



BEAKERS (EURO DESIGN)
Click to Enlarge

BEAKERS (EURO DESIGN)

Material : Polypropylene

CODE NO.

PARTICULARS

LEAST COUNT

PACKING

11110

25 ml

5

12 Pcs

11111

50 ml

5

12 Pcs

11112

100 ml

5

12 Pcs

11113

250 ml

10

12 Pcs

11114

500 ml

10

12 Pcs

11115

1000 ml

20

6 Pcs

11116

2000 ml

50

6 Pcs

11117

5000 ml

200

2 Pcs

Material : TPX

11201

50 ml

5

12 Pcs

11202

100 ml

5

12 Pcs

11203

250 ml

10

12 Pcs

11204

500 ml

10

12 Pcs

11205

1000 ml

20

6 Pcs


See Enlarge




BEAKERS

This burette has a transparent acrylic body and a leakproof stopcock made fitted with a self lubricating PTFE plug. Each burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydrofloric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases.
Material : Polymethyl/Methacrylate/TPX

CODE NO.

PARTICULARS

PACKING

11501

25 ml

10 Pcs

11502

50 ml

10 Pcs

11503

100 ml

10 Pcs


See Enlarge



PIPETTES PUMP
Click to Enlarge

PIPETTES PUMP

Polylab presents a fast release pipetting device for precise pipetting & zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.
Material : Acrylonitrile Butadiene Styrene

CODE NO.

PARTICULARS

PACKING

20001

2 ml

12 Pcs

20002

10 ml

12 Pcs

20003

25 ml

12 Pcs


See Enlarge



DROPPING BOTTLES
Click to Enlarge

DROPPING BOTTLES

Blown in Low Density Polyethylene, polylab dropping bottles dispense small uniform drops of liquids when pressed lightly.
Material : Low Density Polyethylene

CODE NO.

PARTICULARS

PACKING

22101

60 ml

12 Pcs

22102

125 ml

12 Pcs


See Enlarge



REAGENT BOTTLES (NARROW MOUTH)
Click to Enlarge

REAGENT BOTTLES (NARROW MOUTH)

These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable. The Polypropylene cap has a built in seal ring to make these bottles leakproof.
Material : Low Density Polyethylene & Polypropylene

CODE NO. PP

CODE NO. LDPE

PARTICULARS

PACKING

33301

333401

60 ml

12 Pcs

33302

33402

125 ml

12 Pcs

33303

33403

250 ml

12 Pcs

33304

33404

500 ml

12 Pcs

33305

33405

1000 ml

6 Pcs


See Enlarge



REAGENT BOTTLES (WIDE MOUTH)
Click to Enlarge

REAGENT BOTTLES (WIDE MOUTH)

These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable. The Polypropylene cap has a built in seal ring to make these bottles leakproof.
Material : Low Density Polyethylene & Polypropylene

CODE NO. PP

CODE NO. LDPE

PARTICULARS

PACKING

33306

333406

60 ml

12 Pcs

33307

33407

125 ml

12 Pcs

33308

33408

250 ml

12 Pcs

33309

33409

500 ml

12 Pcs

33310

33410

1000 ml

6 Pcs


See Enlarge



NARROW MOUTH BOTTLE
Click to Enlarge

NARROW MOUTH BOTTLE

This autoclavable bottle, made of polypropylene, can be used for storing & transferring chemicals and other reagents safe & sound.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

33501

4000 ml

1 Pc


See Enlarge



WIDE MOUTH SQUARE BOTTLE
Click to Enlarge

WIDE MOUTH SQUARE BOTTLE

This autoclavable botte, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The built in depressions on two sides provide excellent grip while holding this bottle.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

33511

4000 ml.

1 Pc


See Enlarge



HEAVY DUTY VACUUM BOTTLE
Click to Enlarge

HEAVY DUTY VACUUM BOTTLE

This autoclavable bottle, made of polypropylene, has thick walls, is rugged & can be used for repeated applications of vacuum.
Material : Polypropylen

CODE NO.

PARTICULARS

PACKING

33521

2000 ml

1 pc


See Enlarge



CARBOY
Click to Enlarge

CARBOY

Polylab Carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable carboys are provided with wide handles making it convenient while carrying or pouring purposes.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

34001

10 ltr

1 pc

34002

20 ltr

1 pc


See Enlarge



CARBOY WITH STOP COCK
Click to Enlarge

CARBOY WITH STOP COCK

Adding in line of Polylab Aspirators, these polypropylene carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

34051

10 ltr

1 pc

34052

20 ltr

1 pc


See Enlarge



ASPIRATOR BOTTLES
Click to Enlarge

ASPIRATOR BOTTLES

Polylab Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable, durable & dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

34101

5 ltr

1 pc

34102

10 ltr

1 pc

34103

20 ltr

1 pc


See Enlarge



WASH BOTTLES
Click to Enlarge

WASH BOTTLES

Polylab Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by squeezing the bottle tightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required.
Material : Polypethylene

CODE NO.

PARTICULARS

PACKING

36601

125 ml

12 pc

36602

250 ml

12 pc

36603

500 ml

6 pc

36604

1000 ml

6 pc


See Enlarge



WASH BOTTLES (New Type)
Click to Enlarge

WASH BOTTLES (New Type)

These bottles are made of Low Density Polyethylene and are therefore translucent & unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece wash bottle. These bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.
Material : Low Density Polypethylene

CODE NO.

PARTICULARS

PACKING

36605

250 ml

12 pc

36606

500 ml

12 pc

36607

125 ml

12 pc


See Enlarge



WIDE MOUTH WASH BOTTLES
Click to Enlarge

WIDE MOUTH WASH BOTTLES

These wash bottles, made of polyethylene have wide mouth that enables easy fitting as well as cleaning. The unique feature of the cap is through the top closure and stem mouled in one piece.
Material : Polypethylen

CODE NO.

PARTICULARS

PACKING

37101

500 ml

12 pc


See Enlarge



CONICAL FLASK
Click to Enlarge

CONICAL FLASK

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autocaving.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

38101

100 ml

12 pc

38102

250 ml

12 pc

38103

500 ml

12 pc


See Enlarge



SPECIMEN JAR (Gas Jar)
Click to Enlarge

SPECIMEN JAR (Gas Jar)

These transparent specimen jars, used for preserving, different specimens in the lab are provided with a cap that fits in tight. These jars provided excellent protection to the species preserved in it.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

40001

50mm x h200 mm

12 pcs


See Enlarge



FICSHER CLAMP
Click to Enlarge

FICSHER CLAMP

These clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia or 3/8 .
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

45101

Fischer Clamp-Single

12 pcs

45102

Fischer Clamp-Single

6 pcs


See Enlarge




FUNNEL HOLDER

Made of Polypropylene, these corrosion free Funnel Holders can hold funnels with dia 3 to 6. The extra plate provided can be placed to hold funnels bearing dia 1 to 3. Two tapered wedges are provided to ensure firm grip on rods having dia ot 3/8.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

45103

Funnel Holder

12 pcs


See Enlarge



SEPARATORY FUNNEL HOLDER
Click to Enlarge

SEPARATORY FUNNEL HOLDER

This non-corrosive Separatory Funnel Holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods having dia or 3/8.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

45104

Separatory Funnel Holder

12 pcs


See Enlarge



FLASK STAND
Click to Enlarge

FLASK STAND

Moulded in Polypropyene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contract. This flask stand can hold round bottom flasks up to 10 ltr. Capacity. This stackable flask stand can also be steam autoclaved.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

45105

Flask Stand

6 pcs


See Enlarge



CONNECTORS (T & Y)
Click to Enlarge

CONNECTORS (T & Y)

Moulded in Polypropyene, these connectors are basically pipe-like structures in T & Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edged prevent leakage & slippage.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

46001

T-Connectors 6mm

36 pcs

46002

Y-Connectors 6mm

36 pcs

46003

T-Connectors 8mm

36 pcs

46004

Y-Connectors 8mm

36 pcs


See Enlarge



CONNECTORS (T & Y-New)
Click to Enlarge

CONNECTORS (T & Y-New)

These connectors add to the existing range of connectors. The crest & valley structure provided at all the ends of the connectors give excellent leakproof grip to the tube.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

46111

T-Connectors 6mm

36 pcs

46112

Y-Connectors 6mm

36 pcs

46113

T-Connectors 8mm

36 pcs

46114

Y-Connectors 8mm

36 pcs

46115

T-Connectors 10mm

36 pcs

46116

Y-Connectors 10mm

36 pcs


See Enlarge



CONNECTORS (Cross)
Click to Enlarge

CONNECTORS (Cross)

These four way connectors proved to be an excellent option for achieving leakproof joints in tubing connections.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

46121

Cross Connector 6mm

36 pcs

46122

Cross Connector 8mm

36 pcs

46123

Cross Connector 10mm

36 pcs


See Enlarge



CONNECTORS (L Shaped)
Click to Enlarge

CONNECTORS (L Shaped)

These L Shaped connectors also add to the range of different connectors committed to provide excellent leakproof tube arrangements.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

46131

L Connector 6 mm

36 pcs

46132

L Connector 8 mm

36 pcs

46133

L Connector 10 mm

36 pcs


See Enlarge



ANIMAL CAGE
Click to Enlarge

ANIMAL CAGE

Available in two different sizes, these cages provide excellent shelter for different animal species in the laboratory. The metallic top provides proper ventilation and has provisions for feeding the species.
Material : Polypropylene / Stainless Steel

CODE NO.

PARTICULARS

PACKING

47001

290 x 220 x 140 mm

1 pc

47002

430 x 270 x 150 mm

1 pc

47003

Water Bottle 125 ml

12 pcs

47004

Water Bottle 250 ml

12 pcs


See Enlarge



ANIMAL CAGE (Twin Grill)
Click to Enlarge

ANIMAL CAGE (Twin Grill)

Adding in line with the existing range, these animal cages are provided with a stainless steel grill at the bottom of the cage to provide a clean surface for the species to move on.
Material : Polypropylene / Stainless Steel

CODE NO.

PARTICULARS

PACKING

48001

290 x 220 x 140 mm

1 pc

48002

430 x 270 x 150 mm

1 pc


See Enlarge



RETORT STAND
Click to Enlarge

RETORT STAND

These non-corrosive, moulded retort stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm x 750 mm can be screwed into the heavy base giving way to a perfectly stable retort stand.
Material : Polystyrene / polypropylene

CODE NO.

PARTICULARS

PACKING

54101

225 x 150 mm Slide Hole

1 pc

54102

225 x 150 mm Slide Hole

1 pc

54103

225 x 150 mm Slide Hole

1 pc


See Enlarge



DESSICATOR (VACUUM)
Click to Enlarge

DESSICATOR (VACUUM)

Polylab dessicators are made of polypropylene and polycarbonate. These autoclavable vacuum dessicators can hold vacuum up to 740 mm of Hg for 24 hrs without any greasing. The top dome, moulded in rigid and transparent polycarbonate, gives a crystal clear view of the dessicant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The APolypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vacuum creation, shutting off & vacuum releasing.
Material : Polypropylene / Polycarbonate

CODE NO.
VACUUM

SIZE
(mm)

FLANGE
O.D. (mm)

I.D.
(mm)

PACKING

55204

150

171

150

1 pc

55205

200

232

199

1 pc

55206

250

276

240

1 pc

55207

300

340

300

1 pc


See Enlarge



DESSICATOR (PLAIN)
Click to Enlarge

DESSICATOR (PLAIN)

Plain dessicators are physically the same as vacuum dessicator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.
Material : Polypropylene / Polycarbonate

CODE NO.
PLAIN

SIZE
(mm)

FLANGE
O.D. (mm)

I.D.
(mm)

PACKING

55201

150

171

150

1 pc

55202

200

232

199

1 pc

55203

250

276

240

1 pc

55208

300

340

300

1 pc


Both vacuum & plain dessicators are provided with a thick perforated polypropylene disc with a big hole in the centre for easy lifting. The tiny holes in the disc provide air troughs & support to the dishes. However porcelain discs are advisable in case of incandescent crucibles.


See Enlarge



STOP COCKS
Click to Enlarge

STOP COCKS

These polypropylene stop cocks are fitted with a PTFE plug & have serrated tabulations that accept frm 6mm to 10mm tubing. These stop cocks are absolutely leakproof and are available in two different options i.e. 2 way & 3 way.
Material : Polypropylene / PTFE

CODE NO.

PARTICULARS

PACKING

55301

Stop Cock 2 Way

6 pcs

55302

Stop Cock 3 Way

6 pcs


See Enlarge



KIPPS APPARATUS
Click to Enlarge

KIPPS APPARATUS

Polylab Kipps Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the apparatus. H2S gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.
Material : High Density Polyethylene

CODE NO.

PARTICULARS

PACKING

55501

250 ml

1pc

55502

500 ml

1pc

55503

1000 ml

1pc


See Enlarge




FUNNELS-LONG STEM

These long stem funnels have smooth walls, 600 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.
Material : Polypropylene

CODE NO.

PARTICU-LARS

INSIDE

STEM LENGTH

PACKING

57101

50 mm

50

39

72 pcs

57102

62 mm

61

67

36 pcs

57103

75 mm

74

69

36 pcs

57104

100 mm

93

84

36 pcs

57107

150 mm

148

55

12 pcs


See Enlarge



BUCHNER FUNNEL
Click to Enlarge

BUCHNER FUNNEL

Moulded in Polypropylene these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vacuum seal which does not require greasing. The base of the top portion has a perforated filter-plate.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

57105

70 mm

12 pcs

57106

110 mm

6 pcs


See Enlarge



ANALYTICAL FUNNEL
Click to Enlarge

ANALYTICAL FUNNEL

Designed specifically for analytical chemistry, the body of the funnels is 600. Moulded in PP, these funnels are provided with internal & external ribs to prevent air blockage.
Material : Polypropylene

CODE NO.

PARTICU-LARS

INSIDE

STEM LENGTH

PACKING

57200

50 mm

50

50

72 pcs

57201

62 mm

61

67

36 pcs

57202

75 mm

74

77

36 pcs

57203

100 mm

93

95

36 pcs


See Enlarge



PETRI DISH
Click to Enlarge

PETRI DISH

These Polypropylene Petri Dishes are clear, unbreakable & autoclavable.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

57301

50 mm

36 pcs

57302

75 mm

36 pcs

57303

100 mm

36 pcs

57304

125 mm

12 pcs

57305

150 mm

12 pcs


See Enlarge



PETRI DISH (Culture)
Click to Enlarge

PETRI DISH (Culture)

Newly added PS Petri Dish with fitting proves excellent for culture exp. Made in Polystyrene, this transparent Petri Dish provides excellent inside view.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

57501

Petri Dish

12 pcs


See Enlarge



ATOMIC MODEL SET
Click to Enlarge

ATOMIC MODEL SET

These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modeling different organic & inorganic compounds.
SENIOR SET : This set consists of 185 lugs & 370 balls of prescribed colours & sizez packed in a moulded box having separate space for every particular colour & size of ball.
JUNIOR SET : This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

58001

Senior Set

1 pc

58002

Junior Set

1 pc


See Enlarge



ATOMIC MODEL SET (Euro Design)
Click to Enlarge

ATOMIC MODEL SET (Euro Design)

This set consists of moulded balls of different colours & sizes along with connectors of different sizes. The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

58001

Student Set

1 pc

58002

Teacher Set

1 pc


See Enlarge



CRYSTAL MODEL SET
Click to Enlarge

CRYSTAL MODEL SET

These Crystal Model Sets contain different coloured jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.
Material : Polyethylene

CODE NO.

PARTICULARS

PACKING

58101

Diamond

1 pc

58102

Sodium Chloride

1 pc

58103

Graphite

1 pc


See Enlarge



COPLIN JAR
Click to Enlarge

COPLIN JAR

Polylab Coplin Jar made of Polypropylene can hold 10 slides of the size 1x3 back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

62101

Coplin Jar

12 pcs


See Enlarge




SLIDE MAILER

Slide Mailers present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these slide Mailers are available in three sizes i.e. 1,2 & 5 slides.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

62100

1 Slide

25 pcs

62102

2 Slide

25 pcs

62103

5 Slide

25 pcs


See Enlarge



SLIDE BOX
Click to Enlarge

SLIDE BOX

These Slide Boxes are durable, compact & provide utmost protection to 1x3 slides. Heavy walls will not warp, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the

Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

62104

25 Slides

12 pcs

62105

50 Slides

12 pcs

62106

100 Slides

6 pcs


See Enlarge



FLOAT RACK
Click to Enlarge

FLOAT RACK

This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

63201

16 MCTs of 1.5 ml

12 pcs


See Enlarge



SLIDE STORAGE RACK
Click to Enlarge

SLIDE STORAGE RACK

Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100 slides, recognizable through the numeric indexing. Spacing between the slots provide adequate backward & forward movement of slides for convenient recognition. The transparent cover provide excellent view of the slides stored inside.
Material : Acrylonitrile Butadiene Styrene

CODE NO.

PARTICULARS

PACKING

62501

100 Slides

6 pcs


See Enlarge



MCT TWIN RACK
Click to Enlarge

MCT TWIN RACK

Polylab provides this Twin Purpose Rack for both 0.5 ml & 1.5 ml micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5 ml. MCTs, respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

63211

Rack for 0.5 & 1.5 ml MCTS

4 pcs


See Enlarge



PCR TUBE RACK
Click to Enlarge

PCR TUBE RACK

This rack, as the name suggests, is used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipetttes. A no. of racks can be stacked together to save shelf space.
Material : Polycarbonate / Polypropylene

CODE NO.

PARTICULARS

PACKING

63212

Rack for 96 PCR Tubes of 0.2 ml

4 pcs


See Enlarge



MCT BOX
Click to Enlarge

MCT BOX

MCT Boxes are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCTs of 1.5 ml &the other can hold 100 MCTs of 0.5 ml. These boxes are designed to work at temperatures ranging from -1900C to +1210C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control.
Material : Polycarbonate

CODE NO.

PARTICULARS

PACKING

63213

Rack for 100 MCTs of 0.5 ml

4 pcs

63214

Rack for 64 MCTs of 1.5 ml

4 pcs


See Enlarge



CENTRIFUGE TUBE CONICAL BOTTOM
Click to Enlarge

CENTRIFUGE TUBE CONICAL BOTTOM

Polylab Centrifuge tubes with conical bottom are available in two sizes i.e. 15ml & 50 ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclave tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15 ml & 50 ml tubes respectively. These tubes are available sterilized as well as non-sterilized.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

63301

15 ml

100 pcs

63303

50 ml

100 pcs

63311

15 ml-Sterile

100 pcs

63312

50 ml-Sterile

100 pcs


See Enlarge



CENTRIFUGE TUBE ROUND BOTTOM
Click to Enlarge

CENTRIFUGE TUBE ROUND BOTTOM

Polylab Centrifuge tubes with round bottom are moulded in Polypropylene & Polycarbonate. These tubes have excellent clarity and are strong enough to be used upto 50,000xG. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduce their mechanical
Material : Polypropylene / Polycarbonate

CODE NO.

PARTICULARS

PACKING

63401

16 ml Cent. Tube PP

50 pcs

63402

50 ml Cent. Tube PP

50 pcs

63411

16 ml Cent. Tube PC

25 pcs

63412

50 ml Cent. Tube PC

25 pcs

63421

Cap. for 16 ml Cent. Tube

100 pcs

63422

Cap. for 50 ml Cent. Tube

100 pcs


See Enlarge



OAK RIDGE CENTRIFUGE TUBES
Click to Enlarge

OAK RIDGE CENTRIFUGE TUBES

Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can be used up to 50,000xG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 40C.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

63501

30 ml

12 pcs

63502

50 ml

12 pcs

63503

100 ml

12 pcs


See Enlarge



URINE CONTAINER
Click to Enlarge

URINE CONTAINER

These containers can be used for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these container have excellent contact clarity and the cap has built-in seal that makes it completely leakproof.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

63701

30 ml

100 pcs

63702

60 ml

100 pcs


See Enlarge



STOOL CONTAINER
Click to Enlarge

STOOL CONTAINER

These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

63801

30 ml

100 pcs

63802

60 ml

100 pcs


See Enlarge



STOOL CONTAINER
Click to Enlarge

STOOL CONTAINER

In addition to the range of existing sample containers, this Stool Container has the unique feature of one piece moulded cap-spoon combination.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

63901

25 ml

100 pcs


See Enlarge



RIA VIAL
Click to Enlarge

RIA VIAL

These Polypropylene/Polystyrene tubes are generally used in RIA, Coagulation & Bacteriology. The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents.
Material : Polypropylene / Polystyrene

CODE NO.

PARTICULARS

PACKING

64001

12 x 75 mm / PS

500 pcs

64002

12 x 75 mm / PP

500 pcs

64011

Cap for 12 mm RIA tube

100 pcs


See Enlarge



RIA VIAL WITH SCREW CAP
Click to Enlarge

RIA VIAL WITH SCREW CAP

These Polypropylene vials are unique because the cap fitted with an O-ring can be screwed into the vial making it a leakproof vial which can be used in RIA, Coagulation & Bacteriology etc.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

64015

12 x 75 mm Int. Thread

500 pcs


See Enlarge



TEST TUBE WITH SCREW CAP
Click to Enlarge

TEST TUBE WITH SCREW CAP

These Polypropylene tubes provide excellent aption for RIA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

64016

16 x 100 mm Ext. Thread

500 pcs


See Enlarge



TEST TUBE CAP
Click to Enlarge

TEST TUBE CAP

These transparent polypropylene cap for test tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

64021

Cap for Test Tube 25 mm

100 pcs


See Enlarge



STORAGE VIAL
Click to Enlarge

STORAGE VIAL

As the name suggests, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -1900C. The cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

64101

1.0 ml

500 pcs

64102

2.0 ml

500 pcs

64103

5.0 ml

500 pcs


See Enlarge



STORAGE VIAL WITH O-RING
Click to Enlarge

STORAGE VIAL WITH O-RING

This vial has an O-Ring in the cap that makes it absolutely leakproof. Like other storage vials this vial can also be used for storage purposes at temperatures as low as -1900C.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

64111

2.0 ml

500 pcs


See Enlarge



STORAGE VIAL INTERNAL THREAD
Click to Enlarge

STORAGE VIAL INTERNAL THREAD

Another addition to the range of storage vials is this vial which has internal thread in it. The cap fitted with an O-ring screws in to the vial and makes it a leakproof storage vial.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

64115

2.0 ml

500 pcs


See Enlarge



SV10-SV5
Click to Enlarge

SV10-SV5

These Polypropylene vials add to the existing range of Polylab storage vials. Available in 5 ml & 10 ml capacities, these vials have polypropylene cap with built in seal ring making it a leakproof vial just like others storage vials these vials are also used for the storage of biological material, animal & human cells etc.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

64201

SV-10 ml

500 pcs

64202

SV-5 ml

500 pcs


See Enlarge



SCINTILLATION VIAL
Click to Enlarge

SCINTILLATION VIAL

These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.
Material : High Density Polyethylene

CODE NO.

PARTICULARS

PACKING

65001

8 ml

100 pcs

65002

20 ml

100 pcs


See Enlarge



RACKS FOR SCINTILLATION VIAL
Click to Enlarge

RACKS FOR SCINTILLATION VIAL

These racks for scintillation vials, moulded in polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both 8 ml & 20 ml vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

65101

Rack for 90 vials of 8 ml cap.

2 pcs

65102

Rack for 50 vials of 20 ml cap.

2 pcs


See Enlarge



CRYO VIAL - INTERNAL THREAD
Click to Enlarge

CRYO VIAL - INTERNAL THREAD

Adding to the existing range of Cryo Vials is this vial which has internal thread in it. The cap fitted an O-ring screws in to the vial and makes it a leakproof Cryo Vial. These vials are provided with white, prominent graduations and a long making area for sample identification.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

65501

2.0 ml

500 pcs


See Enlarge



CRYO VIAL
Click to Enlarge

CRYO VIAL

Cryo Vials are normally used for storage of Biological material, human & animal cells at temperature as low as -1900C. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudinal grooves in the base give a non-twisting feature to these vials when placed in a cryo rack.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

66001

1.0 ml

1000 pcs

66002

1.8 ml

1000 pcs

66003

4.5 ml

5000 pcs


See Enlarge



CRYO CODERS
Click to Enlarge

CRYO CODERS

These coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

66101

Cryo Coders

100 pcs


See Enlarge



CRYO RACK
Click to Enlarge

CRYO RACK

Polylab Cryo Rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handly rack can hold 50 vials at a time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.
Material : Polycarbonate

CODE NO.

PARTICULARS

PACKING

66201

50 places for 1, 1.8 & 4.5ml Cryo Vials

2 pcs


See Enlarge



CRYO BOX (PC)
Click to Enlarge

CRYO BOX (PC)

Polylab Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accommodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperature ranging from -1900C to +1210C. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.
Material : Polycarbonate

CODE NO.

PARTICULARS

PACKING

66301

81 places for 1ml or 1.8 ml Cryo Vials

4 pcs

66302

81 places for 4.5ml Cryo Vials

4 pcs

66303

100 places for 1ml or 1.8 ml Cryo Vials

4 pcs


See Enlarge



CRYO BOX (PP)
Click to Enlarge

CRYO BOX (PP)

Moulded in Polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built-in spaces to hold vials up to 2ml. capacity. Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials places inside.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

65501

81 places for 1ml or 1.8 ml Cryo Vials

4 pcs

65502

100 places for 1ml or 1.8 ml Cryo Vials

4 pcs


See Enlarge



IMMUNOLOGY PLATES
Click to Enlarge

IMMUNOLOGY PLATES

Polylab ELISA / ASSAY plates are made of optically clear, non-toxic Polystyrene. These plates with 96 U Bottom or Flat bottom wells bear alpha-numeric index. Uniform placement of all the wells facilitate use of multi channel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

66801

Flat Bottom Elisa Plate

72 pcs

66802

U Bottom Elisa Plate

72 pcs

66803

Flat Bottom Assay Plate

72 pcs

66804

U Bottom Assay Plate

72 pcs

66901

Flat Bottom Elisa Plate-Sterile

72 pcs

66902

U Bottom Elisa Plate-Sterile

72 pcs

66903

Flat Bottom Assay Plate-Sterile

72 pcs

66904

U Bottom Assay Plate-Sterile

72 pcs


See Enlarge



MICRO TIP BOX
Click to Enlarge

MICRO TIP BOX

These unique boxes are moulded in Polypropylene and are therefore autoclavable. The box itself is clear providing an excellent view of the tips inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

67001

For 96 Micro Tips of 2-200ul

6 pcs

67002

For 96 Micro Tips of 2-200ul

6 pcs


See Enlarge



MICRO TIP BOX (New)
Click to Enlarge

MICRO TIP BOX (New)

The unique feature of these tip boxes is the improved robust hinge design which prevents the top from being easily disengaged from the bottom of the box.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

67011

For 96 Micro Tips of 2-10ul

6 pcs

67012

For 96 Micro Tips of 2-200ul

6 pcs

67013

For 96 Micro Tips of 200-1000ul

6 pcs


See Enlarge



VOLUMETRIC FLASK
Click to Enlarge

VOLUMETRIC FLASK

Polylab Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

68001

25 ml

6 pcs

68002

50 ml

6 pcs

68003

100 ml

6 pcs

68004

250 ml

3 pcs

68005

500 ml

3 pcs

68006

1000 ml

2 pcs


See Enlarge



PETRI DISH (Disposable)
Click to Enlarge

PETRI DISH (Disposable)

These transparent, ready to se, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Petri Dishes packed individually in polyethylene bags are sterilized by radiation.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

69001

90 mm Radiation Stz.

460 pcs

69002

60 mm Radiation Stz.

300 pcs

69003

35 mm Radiation Stz.

500 pcs


See Enlarge



RACK FOR PETRI DISHES
Click to Enlarge

RACK FOR PETRI DISHES

These racks are clear acrylic construction with polycarbonate posts. 69101 has a capacity to hold 60 petri dishes of 90mm size while 69102 one can hold 56 petri dishes of 60mm. These racks are very useful during inoculation, incubation & storage. Visibility from all sides enables the culture to be seen & checked during incubation.
Material : Polymethyl Methacrylate / Polycarbonate

CODE NO.

PARTICULARS

PACKING

69101

Rack for 90 mm Petri Dishes

2 pcs

69102

Rack for 60 mm Petri Dishes

2 pcs


See Enlarge



UNIVERSAL MULTI RACK
Click to Enlarge

UNIVERSAL MULTI RACK

This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this rack can be used for tubes of 30mm, 20mm, 17mm & 12mm.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

76001

Multi Rack

6 pcs


See Enlarge



NESTLER CYLINDER STAND
Click to Enlarge

NESTLER CYLINDER STAND

This stand, as the name suggests is used for keeping nestler cylinders. Made of polypropylene, this stand is available in two sizes, one for 50ml nestler cylinder & other for 100ml. nestler cylinder.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

76101

50 ml

6 pcs

76102

100 ml

6 pcs


See Enlarge



TEST TUBE STAND
Click to Enlarge

TEST TUBE STAND

This autoclavable stand is perhaps the most commonly used test tube stand in various laboratories . For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia. test tubes, four holes to hold 16 mm dia. tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes.
Another option available in this section is a test tube in which all the
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

77701

16 mm & 25 mm tubes

12 pcs

77702

25 mm tubes

12 pcs


See Enlarge



TEST TUBE STAND (ROUND)
Click to Enlarge

TEST TUBE STAND (ROUND)

A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm dia. Holes & eight 19mm dia. Holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

77704

16 mm & 25 mm tubes

2 pcs


See Enlarge



RACK FOR MICRO CENTRIFUGE TUBES
Click to Enlarge

RACK FOR MICRO CENTRIFUGE TUBES

Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5 ml. micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.
Material : Polycarbonate

CODE NO.

PARTICULARS

PACKING

77705

24 Tubes

4 pcs

77705 A

48 Tubes

4 pcs


See Enlarge



TEST TUBE STAND (3 TIER)
Click to Enlarge

TEST TUBE STAND (3 TIER)

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates whereas in PP racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freezing temperatures.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

77706

13mm x 31 Tubes

2 pcs

77707

16mm x 31 Tubes

2 pcs

77708

20mm x 20 Tubes

2 pcs

77709

25mm x 12 Tubes

2 pcs

77710

25mm x 18 Tubes

2 pcs

77711

32mm x 12 Tubes

2 pcs

77712

25mm x 36 Tubes

2 pcs

77714

13mm x 18 Tubes

4 pcs

77715

15mm x 18 Tubes

4 pcs

77716

18mm x 12 Tubes

4 pcs

77717

13mm x 62 Tubes

2 pcs

77718

16mm x 62 Tubes

2 pcs

77719

20mm x 40 Tubes

2 pcs

77720

13mm x 48 Tubes

2 pcs

77721

13mm x 72 Tubes

2 pcs

Material : Polycarbonate

CODE NO.

PARTICULARS

PACKING

77801

13mm x 31 Tubes

2 pcs

77802

16mm x 31 Tubes

2 pcs

77803

20mm x 20 Tubes

2 pcs

77804

25mm x 12 Tubes

2 pcs

77805

13mm x 62 Tubes

2 pcs

77806

16mm x 62 Tubes

2 pcs

77807

20mm x 40 Tubes

2 pcs

77808

25mm x 24 Tubes

2 pcs

77809

25mm x 18 Tubes

2 pcs

77810

25mm x 36 Tubes

2 pcs

77811

32mm x 12 Tubes

2 pcs


See Enlarge



TEST TUBE STAND (3 TIER)
Click to Enlarge

TEST TUBE STAND (3 TIER)

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates whereas in PP racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freezing temperatures.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

77706

13mm x 31 Tubes

2 pcs

77707

16mm x 31 Tubes

2 pcs

77708

20mm x 20 Tubes

2 pcs

77709

25mm x 12 Tubes

2 pcs

77710

25mm x 18 Tubes

2 pcs

77711

32mm x 12 Tubes

2 pcs

77712

25mm x 36 Tubes

2 pcs

77714

13mm x 18 Tubes

4 pcs

77715

15mm x 18 Tubes

4 pcs

77716

18mm x 12 Tubes

4 pcs

77717

13mm x 62 Tubes

2 pcs

77718

16mm x 62 Tubes

2 pcs

77719

20mm x 40 Tubes

2 pcs

77720

13mm x 48 Tubes

2 pcs

77721

13mm x 72 Tubes

2 pcs

Material : Polycarbonate

CODE NO.

PARTICULARS

PACKING

77801

13mm x 31 Tubes

2 pcs

77802

16mm x 31 Tubes

2 pcs

77803

20mm x 20 Tubes

2 pcs

77804

25mm x 12 Tubes

2 pcs

77805

13mm x 62 Tubes

2 pcs

77806

16mm x 62 Tubes

2 pcs

77807

20mm x 40 Tubes

2 pcs

77808

25mm x 24 Tubes

2 pcs

77809

25mm x 18 Tubes

2 pcs

77810

25mm x 36 Tubes

2 pcs

77811

32mm x 12 Tubes

2 pcs


See Enlarge



TEST TUBE STAND (WIRE PATTERN)
Click to Enlarge

TEST TUBE STAND (WIRE PATTERN)

An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

77901

13mm x 90 Tubes

6 pcs

77902

16mm x 60 Tubes

6 pcs

77903

20mm x 40 Tubes

6 pcs

77904

25mm x 24 Tubes

6 pcs


See Enlarge



RACK FOR MICRO CENTRIFUGE (Folding)
Click to Enlarge

RACK FOR MICRO CENTRIFUGE (Folding)

These two-tier versatile racks, made of polypropylene, are autoclavable & can be used dry, in water baths or in freezers. These racks are provided with alpha numeric index for easy sample identification. Racks are stackable even when loaded and have purpose designed label spaces on each side.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

77910

100 places for 1.5ml MCTs

6 pcs


See Enlarge




TEST TUBE BASKETS

Polylab Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive baskets are ideal for rinsing & draining glassware. These are also useful for storage for test tubes of culture tubes during sterilization or incubation.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

78101

140x120x110 mm

6 pcs

78102

160x160x160 mm

6 pcs


See Enlarge



DRAINING BASKET
Click to Enlarge

DRAINING BASKET

As the name suggests, this basket with wide net like structure on all sides prove easily useful for draining different laboratory apparatus after washing them. Made of polypropylene, this basket can be repeatedly autoclaved.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

78103

400x400x100 mm

6 pcs


See Enlarge



PIPETTE STAND (HORIZONTAL)
Click to Enlarge

PIPETTE STAND (HORIZONTAL)

This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembled for space saving storage.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

79101

For 12 Pipettes

6 pcs


See Enlarge



PIPETTE STAND (VERTICAL)
Click to Enlarge

PIPETTE STAND (VERTICAL)

This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia. 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

79102

For 28 Pipettes

1 pc


See Enlarge



PIPETTE STAND (94 PIPETTES-ROTARY)
Click to Enlarge

PIPETTE STAND (94 PIPETTES-ROTARY)

Moulded in Polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipettes. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationery base by the outer ring. This stand can be easily disassembled & reassembled.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

79103

For 94 Pipettes

1 pc


See Enlarge



PIPETTE BOX
Click to Enlarge

PIPETTE BOX

Made of polypropylene, this pipette box is designed is such a way that it can hold pipettes of different lengths. The top of the box screws on the bottom and the height can be adjusted by screwing or unscrewing the top.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

79111

Pipette Box

4 pcs


See Enlarge



REAGENT RESERVOIR
Click to Enlarge

REAGENT RESERVOIR

Moulded in Polypropylene, this autoclavable reagent reservoir is helpful for multi-channel pipettes to be used into microtiter plates.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

79121

75 ml

12 pcs


See Enlarge



UNIVERSAL REAGENT RESERVOIR
Click to Enlarge

UNIVERSAL REAGENT RESERVOIR

This Universal Reagent Reservoir is a graduated single reagent reservoir with maximum volume of 50 ml, reservoir with 8 separate numbered 5 ml. reagent channels & a reservoir with 12 separate numbered 5 ml reagent channels. Made of polypropylene these reagent reservoirs are repeatedly autoclavable and can be used with all multi-channel pippetes.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

79131

50 ml

6 pcs


See Enlarge



ICE BUCKET
Click to Enlarge

ICE BUCKET

This Ice Bucket is made of a durable rigid material bearing excellent insulating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.
Material : Polyurethane

CODE NO.

PARTICULARS

PACKING

79201

Ice Bucket

1 pc


See Enlarge



STAINING BOX
Click to Enlarge

STAINING BOX

Moulded in Polypropylene, this staining box helps in staining, fixing, de-staining and handling fragile electrophoresis and membranes. Box as well as cover will resist temperatures from -700C to +700C. The LDPE plug provides leakproof seal and allows easy liquid drainage.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

79301

125x125x50mm

2 pcs


See Enlarge



MEASURING CYLINDERS
Click to Enlarge

MEASURING CYLINDERS

Polylab measuring cylinders, moulded in polypropylene & TPX, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.
Material : Polypropylene

CODE NO.

PARTICULARS

LEAST COUNT

PACKING

80001

10 ml

0.2 ml

24 pcs

80002

25 ml

0.5 ml

12 pcs

80003

50 ml

1 ml

12 pcs

80004

100 ml

1 ml

12 pcs

80005

250 ml

2 ml

6 pcs

80006

500 ml

5 ml

4 pcs

80007

1000 ml

10 ml

3 pcs

80008

2000 ml

20 ml

2 pcs

Material : TPX (Poly Methyl Pentene)

CODE NO.

PARTICULARS

LEAST COUNT

PACKING

80021

10 ml

0.2 ml

24 pcs

80022

25 ml

0.5 ml

12 pcs

80023

50 ml

1 ml

12 pcs

80024

100 ml

1 ml

12 pcs

80025

250 ml

2 ml

6 pcs

80026

500 ml

5 ml

4 pcs

80027

1000 ml

10 ml

3 pcs


See Enlarge



MEASURING CYLINDER HEXAGONAL
Click to Enlarge

MEASURING CYLINDER HEXAGONAL

Polylab measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent.
Material : Polypropylene

CODE NO.

PARTICULARS

LEAST COUNT

PACKING

80031

10 ml

0.2 ml

24 pcs

80032

25 ml

0.5 ml

12 pcs

80033

50 ml

1 ml

12 pcs

80034

100 ml

1 ml

12 pcs

80035

250 ml

2 ml

6 pcs

80036

500 ml

5 ml

4 pcs

80037

1000 ml

10 ml

3 pcs


See Enlarge



MEASURING CYLINDER PENTAGONAL
Click to Enlarge

MEASURING CYLINDER PENTAGONAL

Adding to the range of round & hexagonal base cylinders are the pentagonal ones. Polylab now offers you a wide range of cylinders with different bases to choose from. Prominently raised graduation & excellent contact clarity are among the other features of these cylinders.
Material : Polypropylene

CODE NO.

PARTICULARS

LEAST COUNT

PACKING

80051

10 ml

0.2 ml

24 pcs

80052

25 ml

0.5 ml

12 pcs

80053

50 ml

1 ml

12 pcs

80054

100 ml

1 ml

12 pcs

80055

250 ml

2 ml

6 pcs

80056

500 ml

5 ml

4 pcs

80057

1000 ml

10 ml

3 pcs


See Enlarge



MEASURING JUGS
Click to Enlarge

MEASURING JUGS

These handy jugs, moulded in polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.
Material : Polypropylene

CODE NO.

PARTICULARS

LEAST COUNT

PACKING

81101

250 ml

10 ml

12 pcs

81102

500 ml

10 ml

12 pcs

81103

1000 ml

10 ml

6 pcs

81104

2000 ml

20 ml

6 pcs


See Enlarge



MEASURING JUGS (EURO DESIGN)
Click to Enlarge

MEASURING JUGS (EURO DESIGN)

Adding to the existing range of polylab jugs, these short form transparent jugs, made of polypropylene are autoclavable and have non-drip spout. These jugs have raised graduations, provide excellent contact clarity & are provided with excellent thumb grip on handle.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81121

500 ml

12 pcs

81122

1000 ml

6 pcs

81123

2000 ml

6 pcs

81124

3000 ml

6 pcs

81125

5000 ml

4 pcs


See Enlarge



CONICAL MEASURES
Click to Enlarge

CONICAL MEASURES

These conical measures are very good for measuring small quantities of reagents. Moulded in polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The measures are clear, have good chemical resistance and have raised graduations for easy
Material : Polypropylene

CODE NO.

PARTICULARS

LEAST COUNT

PACKING

81150

12 ml

1 ml

12 pcs

81151

25 ml

1 ml

12 pcs

81152

50 ml

2 ml

12 pcs

81153

125 ml

5 ml

12 pcs

81154

200 ml

5 ml

12 pcs


See Enlarge



SEPARATORY FUNNEL
Click to Enlarge

SEPARATORY FUNNEL

Polylab separatory funnel is made of polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable separating funnel has a leakproof threaded screw cap. The polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the separatory funnel.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81201

100 ml

2 pcs

81202

250 ml

2 pcs

81203

500 ml

2 pcs


See Enlarge



SPATULA
Click to Enlarge

SPATULA

Moulded in polypropylene, spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81301

150 ml

12 pcs

81302

200 ml

12 pcs


See Enlarge



CELL SCRAPER
Click to Enlarge

CELL SCRAPER

This cell scraper, as the name suggests, provides an excellent option for cell scraping purposes in microbiology.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

81321

240 ml

10 pcs

81322

300 ml

10 pcs


See Enlarge



STIRRER
Click to Enlarge

STIRRER

Made of Polypropylene, these stirrers are very useful for stirring different solutions in the laboratory. These stirrers prove to be tough and long lasting.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81401

-10 mm x h-250 mm

12 pcs

71405

-7 mm x h-200 mm

12 pcs

81406

-7 mm x h-250 mm

12 pcs

81407

-7 mm x h-300 mm

12 pcs


See Enlarge



POLICEMEN STIRRING RODS
Click to Enlarge

POLICEMEN STIRRING RODS

This, in fact, is a multipurpose apparatus which works as a stirrer as well spatula. The fattened ends of this rod form two small spatulas.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81411

-6 mm x h-245 mm

12 pcs


See Enlarge



SOFT LOOP STERILE
Click to Enlarge

SOFT LOOP STERILE

This non-toxic disposable loop is accurate to semi quantitative stand for handling samples.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

81421

Soft loopes 1 ml

100 pcs

81422

Soft loopes 10 ml

100 pcs

81423

Innoculation Needle

100 pcs


See Enlarge



L SHAPED SPREADER
Click to Enlarge

L SHAPED SPREADER

This sterile, smooth spreader enables even spreading of liquid samples across the surface of a jar plate without grouping & cutting the medium.
Material : Polystyrene

CODE NO.

PARTICULARS

PACKING

81431

L Shaped Spreader

100 pcs


See Enlarge



MICRO PESTLE
Click to Enlarge

MICRO PESTLE

This double ended pestles one end fits 1.5 ml Micro centrifuge tube & the other one fits 0.5 ml Micro centrifuge tube.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81441

Micro Pestle

12 pcs


See Enlarge



PNEUMATIC TROUGH
Click to Enlarge

PNEUMATIC TROUGH

These troughs, made of polypropylene, are autoclavable and are available in different sizes. These can be used for a wide range of purposes including storage, sterilizing & drying labware etc.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81501

-180 x h-60 mm

6 pcs

81502

-200 x h-100 mm

6 pcs

81503

-250 x h-100 mm

4 pcs


See Enlarge



PLANTATION POTS
Click to Enlarge

PLANTATION POTS

Polylab plantation pots, moulded in polypropylene, are available in four different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81601

100 mm

20 pcs

81602

150 mm

20 pcs

81603

200 mm

20 pcs

81604

250 mm

20 pcs


See Enlarge



LABORATORY TRAY
Click to Enlarge

LABORATORY TRAY

Needles to say, polylab laboratory tray mouded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81701

450 x 350 x 75 mm

10 pcs

81702

375 x 300 x 75 mm

10 pcs


See Enlarge



UTILITY TRAY
Click to Enlarge

UTILITY TRAY

Adding to the already existing range of autoclavable laboratories trays, is the utility tray and as the name suggests this polypropylene tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81721

375 x 350 x 130 mm

6 pcs


See Enlarge



CARRIER TRAY
Click to Enlarge

CARRIER TRAY

This autoclavable polypropylene tray has a unique feature i.e. its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81731

380 x 240 x 115 mm

6 pcs


See Enlarge



DRAINING RACK
Click to Enlarge

DRAINING RACK

Polylab draining rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw nuts. Bottom of the rack is provided with a tray which collects all the waster water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
Material : Acrylopitrile Butadiene Styrene / Polycarbonate

CODE NO.

PARTICULARS

PACKING

81741

Draining Rack

1 pc


See Enlarge



MAGENTA BOX
Click to Enlarge

MAGENTA BOX

Magenta box is a very often used in tissue culture & agricultural research experiments. Main body of this box is made of tough & transparent polycarbonate which provides excellent view of the contents inside while the cover is made of polypropylene. This autoclavable box is square in shape giving itself a space saving feature.
Material : Polycarbonate / Polypropylene

CODE NO.

PARTICULARS

PACKING

81801

Magenta Box

12 pcs


See Enlarge



STORAGE BOXES
Click to Enlarge

STORAGE BOXES

These storage boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in three different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

81900

250 ml

12 pcs

81901

500ml

12 pcs

81902

1000 ml

12 pcs


See Enlarge



SIMPLE CELL POT
Click to Enlarge

SIMPLE CELL POT

Simple cell pot, as the name suggests, us used for making simple cells & voltmeters etc. Moulded in polypropylene, this pot has very good contact clarity and excellent chemical resistance. Being in polypropylene, this pot is much durable than the one used conventionally.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

82101

Simple Cell Pot

12 pcs


See Enlarge



LECLANCHE CELL POT
Click to Enlarge

LECLANCHE CELL POT

Blown in polypropylene, this pot is used for making Leclanche Cell. This pot too has very good contact clarity & excellent chemical resistance.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

82102

Leclanche Cell Pot

12 pcs


See Enlarge



SAMPLE CONTAINER (PRESS & FIT TYPE)
Click to Enlarge

SAMPLE CONTAINER (PRESS & FIT TYPE)

Made of polypropylene, these disposable containers are used for collecting samples of sputum or urine etc. Graduated on the outer surface, these containers have cap that work in a press & fit manner & make these containers leakproof. These disposable containers are E.T.O. sterilized.
Material : Polypropylene

CODE NO.

PARTICULARS

PACKING

82103

50 ml

100 pcs

82104

25 ml

200 pcs


See Enlarge




[1]


 
 

Home | About Us | Quality Control | Management Setup | Product & Services | Profile | Contact Us

Copyright 2008-2009. Popular Science Apparatus Workshops Pvt. Ltd.. All Rights are Reserved