Laboratory Plasticware

Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100 slides, recognizable through the numeric indexing. Spacing between the slots provide adequate backward & forward movement of slides for convenient recognition. The transparent cover provide excellent view of the slides stored inside.
Material : Acrylonitrile Butadiene Styrene

Polylab provides this Twin Purpose Rack for both 0.5 ml & 1.5 ml micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5 ml. MCTs, respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube.
Material : Polypropylene

This rack, as the name suggests, is used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipetttes. A no. of racks can be stacked together to save shelf space.
Material : Polycarbonate / Polypropylene

MCT Boxes are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCTs of 1.5 ml &the other can hold 100 MCTs of 0.5 ml. These boxes are designed to work at temperatures ranging from -1900C to +1210C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control.
Material : Polycarbonate

Polylab Centrifuge tubes with conical bottom are available in two sizes i.e. 15ml & 50 ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclave tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15 ml & 50 ml tubes respectively. These tubes are available sterilized as well as non-sterilized.
Material : Polypropylene

Polylab Centrifuge tubes with round bottom are moulded in Polypropylene & Polycarbonate. These tubes have excellent clarity and are strong enough to be used upto 50,000xG. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduce their mechanical
Material : Polypropylene / Polycarbonate

Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can be used up to 50,000xG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 40C.
Material : Polypropylene

These containers can be used for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these container have excellent contact clarity and the cap has built-in seal that makes it completely leakproof.
Material : Polypropylene

These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like structure that proves helpful in lifting samples.
Material : Polypropylene

In addition to the range of existing sample containers, this Stool Container has the unique feature of one piece moulded cap-spoon combination.
Material : Polypropylene

These Polypropylene/Polystyrene tubes are generally used in RIA, Coagulation & Bacteriology. The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents.
Material : Polypropylene / Polystyrene

These Polypropylene vials are unique because the cap fitted with an O-ring can be screwed into the vial making it a leakproof vial which can be used in RIA, Coagulation & Bacteriology etc.
Material : Polypropylene

These Polypropylene tubes provide excellent aption for RIA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim.
Material : Polypropylene

These transparent polypropylene cap for test tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one.
Material : Polypropylene

As the name suggests, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -1900C. The cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudinal grooves which give it a non-twisting character when placed in a vial rack.
Material : Polypropylene