|
Replacement Parts for Model CH 2 L (699B )
699B/06
|
Stainless steel reaction bottle capacity 2 Litre |
699B/07
|
V-belt for shaking mechanism |
699B/08
|
Silicone Bush (Cork) for 1 Litre Bottle |
699B/09 |
Silicone Bush (Cork) for 2 Litre Bottle |
See Enlarge
|
|
|
|
|
Analytical Polyacrylamide Electrophoresis Apparatus PSAW (705)Technique of zone electrophoresis in polyacrylamide get columns. Complete with all necessary parts compirising :-
1 |
Lower buffer reservoir having lower electrode assembly, platinum electrode, upper buffer reservoior for holding 8gels, lid electrode, complete apparatus is made of imnported acrylicmaterial. |
2 |
Precibor running tubes, precision boreglass tubing.1 pkt. of 24 |
3 |
Polythene closure for retaining gel inrunning tube during filling and polymerisation operation.1 pkt. of 24 |
4 |
Running tube grommets made of specialquality rubber for tightly holding tube in upper buffer reservoir.1 pkt. of 10 |
5 |
Synthetic rubber bungs for sealing of holesin upper buffer reservoir when less than the maximum number of gets are beingrun.1 pkt. of 10 |
6 |
Glass or plastic syringe 5 ml. With needlefor preparation og gel in precibor running tubes. 2 Nos. |
7 |
Tubes stand made of perspex for 10tubes.1 Nos. |
8 |
Stabilised D.C. Power Supply : For theelectrophoresis 0-300 V and 100 mA. Complete set ofabove. |
See Enlarge
|
|
|
|
|
Analytical Polyacrylamide Electrophoresis Apparatus PSAW (706 ) Same as but supplied without power supply.
See Enlarge
|
|
|
|
|
Vertical Gel Slab Migration Apparatus PSAW (707 ) For 160 x 200 mm. Glass plates, spaces, sample chamber, casting comb, full length platinum wire etc. without power supply
See Enlarge
|
|
|
|
|
Spare Glass Plates For Vertical Gel Slab Migration Apparatus PSAW PAIR (708 )
See Enlarge
|
|
|
|
|
Immuno Electrophoresis Apparatus PSAW (709 ) Comprising walled migration cell made of white perspex, outer chamber is provided with inlets and outlets for circulation of cold water. Inner chamber is the buffer chamber fitted with electrodes, with a clear transparent top lid fitted with a handle, a special perspex carrier is supplied as micro immunological accessary which permits simultaneous studies on upto eight 3" x 1" standard anger coated micro slides. complete with plug, terminals and cables WITHOUT power pack size of 30 x 30 x 8 cms.
See Enlarge
|
|
|
|
|
Electrophoresis Apparatus Paper Strip PSAW (710 ) The electrophoresis cabinet is made of clear transparent plastic (perspex sheet) 16" long, 91/2 with, 41/4" high and effective width i.e. maximum usable width of papar carrier 71/4". The upper surface of the platform which supports the paper strip carrier and the electrode troughs are finished with black surfaces for contrast. A recessed safety inter lock switch breaks the current to both electrode troughs have a capacity of 550 ml. each and provided with two transverse baffles of minimize diffusion of buffer in electrode section of trough with buffer is in contact with end of paper strips. The polatry of the electrode is indicated by two pilot lamps fitted with levelling screws to facilitate levelling. supplied complete with cord and terminals connecting to the power supply, stabilised D.C. Power supply unit 0-300 volts and 100 mA. is provided with apparatus.
See Enlarge
|
|
|
|
|
Electrophoresis Apparatus Paper Strip PSAW (711 )Same as EP 13 but without power supply unit.
See Enlarge
|
|
|
|
|
Stabilised D.C. Power Supply Unit PSAW (712 ) 0-300 volts and 100 mA for electrophoresis apparatus.
See Enlarge
|
|
|
|
|
Digital D.C. Power Supply Unit PSAW (713 ) 0-300 volts and 100 mA for electrophoresis apparatus.
See Enlarge
|
|
|
|
|
Thin Layer Chromatography Apparatus "PSAW" (714)This unit is based on desage German partion having moveable applicator with in in built thickness arrangement between 0 to 2 mm. Model CH 9 has the following components
(a) |
Speader (Applicator) made of electroplated brass. |
(b) |
Perspex Bass size 114 x 23 cm. to support 5 glass plates of size 20 x 20 cm. and 2 plates of 20 x 5 cm. |
(c) |
Plate Rack Alluminium for ten 20 x 20 cm.Plates. |
(d) |
Spotting Ten plate perspex |
(e) |
Developing Tank with Lid |
(f) |
T.L.C. plates set 20 x 20 cm. or 20 x 10 cm. |
(g) |
Micro-Pipette |
(h) |
Scriber for marking lines |
(i) |
Glass sprayer with rubber bellow |
(j) |
Instruction manual |
See Enlarge
|
|
|
|
|
Thin Layer Chromatography Apparatus PSAW Model CH9A (715 )This unit is same as CH9 but provided with alluminium applicator
See Enlarge
|
|
|
|
|
Accessories for PSAW T.L.C. apparatus (716 )
See Enlarge
|
|
|
|
|
T.L.C. master sheet for direct reading of Rf values Evolved by Dr. S.K.Arora (716/01 )
See Enlarge
|
|
|
|
|
Dessicator Cabinet PSAW (716/12 )This is used for storing plates in thin layer chromatography and for general laboratory work. Made of thick alluminium sheet, with stout glass door sealed with rubber gasket. A tray for silica gel dessicant and perforated shelf are provided
Inner Dimensions :
Depth Size : 35 cm. X 50 cm. X 30 cm.
See Enlarge
|
|
|
|
