Microtomes and Staining Instruments

Click to Enlarge

High quality steel, flat one side the other being hollow ground.

Click to Enlarge

With table clamp designed for cutting paraffin embedded specimens in varying thickness upto 50 microns, in increments of 5 microns. The microtome is cast Aluminium housing with weather proofed apoxy paint finish of approx. size 150 x 75 x 60mm and set in stainless steel top plate. Complete with polished wooden case & table clamp. Fine brush 4 microscopic slides, 1 packet razor blades.

Sample to be sectioned is supported in styropith or other material and placed in a central well. Turning a milled knob at the base of the microtome raises the sample, and sections can be cut from the top using a razor. Screw has 19mm overall movement with click stops at 20mm intervals. Top dia. 63mm, well dia. 22mm

Click to Enlarge

Ideal for student use and routine work. For cutting paraffin embedded specimens of comparatively soft tissues. It will cut long ribbons of sections from specimens not exceeding 20 mm diameter and, using wood blocks, sections of specimens upto 18 x 25mm may be cut. The thickness of the sections may be varied between 2 and 24 micron. With simple object holder, knife and honing stone.

Click to Enlarge

It is of immense use for Medical Institutions, Research Laboratories etc. and gives very good results for cutting thin sections. It is mounted on a heavy cast iron base to ensure rigidity and long life. The housing gives maximum protection to the mechanism against dust and paraffin waste etc. It is driven by handle which can be locked in position. The cutting section obtained by mechanically operated crank can be adjusted in steps of 1µ to 25µ by means of a knurled knob on the front of the instrument. The efficient ball and socket clamp renders if possible to interchange specimen clamp and paraffin stage with a single motion. The knife work is equipped with a rotating knife, honing plate, three object holders and oil can.

Click to Enlarge

A heavy base with hinged cover for protecting the interior mechanism, and knife holder. With every complete revolution of the drive wheel, the feed panel engaged the teeth of rachet wheel which advances the object holder through cone and inclined plane mechanism, tissue sections can be cut down to every 1 micron. A safety device automatically disengages the feed mechanism. Feed indicator is in front and feed setting is at back of Microtome which sets 1 to 50 micron. A razor 120mm made from heat treated steel and tested for Micro structure is supplied with instrument. There is an arrangement to tilt angle of the razor adjustable upto 30° on a reference scale.

Click to Enlarge

Manufactured from good quality sheet glass having a uniform thickness and ground edges. Each box contains 50 slides.
Description :

Cat. No.	Size
1552.01	75x25x2.00mm
1552.02	75x25x1.35mm
1552.03	75x25x1.25mm
1552.04	75x25x1.15mm
1552.05	75x25x1.00mm

Click to Enlarge

Made of finest quality sheet glass having a uniform thickness and ground edges. Having cavities of 16mm dia. and 0.8mm deep.
Description

Cat. No.	Cavities
1556.01	One
1556.02	Two
1556.03	Three

Click to Enlarge

Round, cover glasses No. 1 are the correct thickness for most microscope optics. Resistance glass, 0.13 to 0.16 mm thick. Pack of 10 gms.
Description :

Cat. No.	Size
1560.01	18mm
1560.02	19mm
1560.03	22mm
1560.04	24mm

Click to Enlarge

Rectangular, cover glasses No. 1 are the correct thickness for most microscope optics. Resistance glass, 0.13 to 0.16mm thick. Pack of 10 gms.
Description :

Cat. No.	Size
1564.01	22x30mm
1564.02	22x40mm
1564.03	22x50mm
1564.04	24x40mm
1564.05	24x50mm
1564.06	24x60mm

Click to Enlarge

Square, cover glasses No. 1 are the correct thickness for most microscope optics. Resistance glass, 0.13 to 0.16 mm thick. Pack of 10 gms.
Description :

Cat. No.	Size
1568.01	18x18mm
1568.02	19x19mm
1568.03	22x22mm
1568.04	24x24mm

Polished hardwood, for twelve 30ml dropping bottles.

Click to Enlarge

Glass trough with moulded glass cover. Dimensions side 117mm, 65mm height.

Click to Enlarge

Glass jar, with moulded glass cover. Takes 10 slides 76 x 26mm back to back.

Click to Enlarge

Wrap proof, break proof molded plastic boxes for storage of prepared microscope slides. Has slots to accommodates slides, with lid.
Description :

Cat. No.	Capacity
1585.01	25 slides
1585.02	50 slides
1585.03	100 slides