Refrigeraion Apparatus

Used for storing cadaverous under low temperature cool conditions in order to prevent decomposition. These units are double walled with outer made of M.S. sheet duly painted and inner wall of stainless steel. Front opening covered door with magnetic gasket lock & key and handle individual chambers are provided independent lock with duplicate keys. Trays made of G.I. sheet to carry dead bodies are provided with handles. Trays travel on rollers fitted with ball bearing for easy movement. Hermetically sealed compressor serves refrigeration unit to maintain temperature range of 2°C to 5°C or (-) 15°C to (-) 20°C (as ordered) Unit is fitted with digital temperature indicator-cum-controller. Works on 220/230 volts A.C. supply.

Capacity	Temp.	Temp.	Voltage Stabilizer
Single Body	2°to 5° C	-15°C to 20°C	3KVA
Two Bodies	2°to 5° C	-15°C to 20°C	4KVA
Three Bodies	2°to5° C	-15°C to 20°C	5KVA
Four Bodies	2°to 5° C	-15°C to 20°C	8KVA
Six Bodies	2°to 5° C	-15°C to 20°C	8KVA

Blood Bank Chamber is a most versatile unit for blood bank mounted on a sturdy angle frame. The inner chamber is made up of stainless steel sheet and outer of mild steel sheet duly powder coated paint. Caster wheels provided for easily mobility. The temperature, for stroing blood bottles or blood bags. Temperature is controlled by microprocessor PID digital temperature controlled-cum-indicator and triggers the AUDIO VISUAL ALARAM in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with DOOR OPERATED ALARAM and POWER SUPPLY FAILURE ALARAM, as a safety devices.
A highly efficient refrigeration system consists of hermetically sealed compressor, for high performance cooling coil runs all around the cabinet to maintain uniformity of temperature. The entire refrigeration unit is housed at bottom. Two doors are provided. Inner door is of transparent acrylic sheet for easy viewing inside the chamber. Outer door is duly insulated for proper sealing from external environment and is lockable. Drawers are provided for holding bags. Suitable to works on 220/230volts A.C.
Available in following capacities:-
a. 85 litres ( 50 blood bags)
b. 165 litres (110 blood bags)
c. 200 litres (200 blood bags)
d. 280 litres (250 blood bags)
e. 400 litres (360 blood bags)
OPTIONAL:-
i) Chart type temperature recorder.
ii) Voltage stabilizer. (Recommended)

Vaccine storage, the most versatile unit for vaccine storage. Inner chamber made of stainless steel external mild steel sheet body of rigid steel frame. Insulated thoroughly provided with face fitting doors, complete with self-closing hinges lockable fasteners.
Cabinet is fully sealed to avoid spilling and contamination from external environment. Temp. range from 4°C to 6° C. Available in various sizes for keeping vaccines bottles. Drawers with clear Perspex fronts and index card holders. Temp controlled and displayed by Microprocessor PID digital temperature controlled-cum-indicator. Audio visual alarms are triggered in the event of fluctuations exceeding permitted tolerance level. Suitable to work on 220C, single phase. 50Hz, AC supply.
Available in following sizes:-
a) 450x400x850mm.
b) 600x675x850mm.
OPTIONAL:-
i) Chart type Temperature recorder.
ii) Voltage Stabilizer. (Recommended)

Double walled with inner chamber made of S.S and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to –20° C is achieved by hermetically sealed compressor. Body is mounted on a sturdy angle iron frame and is mounted on castor wheels. Unit is fitted with solid state digital temperature indicator-cum-controller. Horizontal chest models are supplied in a single compartment where as vertical models are supplied with three stainless steel storing shelves.
Capacity 4cuft. 6cuft. 10cuft. 12cuft.

OPTIONAL:- Supplied with Automatic voltage stabilizer.
Note: Please ask for other capacities and size of your requirement

Humidifier is basically an Atomizing Humidifier of splash plate rotating disc type. Designed to give relative humidity as high as up to 95% RH in enclosed areas. Humidifier is a portable unit body made of alumiPSAWm/Stainless steel. Capable of atomizing up to three litres of water in an hour at full evaporation in the driest possible ambient conditions. Provided with automatic flout valve assembly to work on 220VAC. Capactiy:5 litres
OPTIONAL:- Control box with Humidistat for controlling humidity.

(Fitted with time controlled safety device in, case humidity controller fails, for safety of the compressor) These are water condensing type, based on “Refrigeration Cycle” to avoid use of expensive chemicals required for desiccant type models. The unit is self standing and is mounted on a study angle iron frame. Fitted with castor wheels. It removes excess moisture from the atmosphere and Is fitted with hermetically sealed compressor. Heat exchanger and water condensing coils are made of copper. Water collection tank is provided below the unit is collect condensate water. Humidity is controlled by HUMIDITY CONTROLLER is corporated in the unit, up to 30% ± 30% RH, depending upon the ambient conditions. To achieve very low humidity, the room should have a independent window type air conditioner to much with the dehumidifier heat load in the room. Suitable to work on 220/230volts A..C. supply. Capacity 1.5 Tons

(Fitted with time controlled safety device in, case humidity controller fails, for safety of the compressor) These are water condensing type, based on “Refrigeration Cycle” to avoid use of expensive chemicals required for desiccant type models. The unit is self standing and is mounted on a study angle iron frame. Fitted with castor wheels. It removes excess moisture from the atmosphere and Is fitted with hermetically sealed compressor. Heat exchanger and water condensing coils are made of copper. Water collection tank is provided below the unit is collect condensate water. Humidity is controlled by HUMIDITY CONTROLLER is corporated in the unit, up to 30% ± 30% RH, depending upon the ambient conditions. To achieve very low humidity, the room should have a independent window type air conditioner to much with the dehumidifier heat load in the room. Suitable to work on 220/230volts A..C. supply. OPTIONAL:- Automatic Voltage stabilizer 4.0KVA (Recommended)

Simple but versatile rotary micro tome for uniform sectioning up to 25 microns in step of 1 micron each. The mechanical system encased in a removable cover. Complete with razor (120mm) with back & handle, object holder set of three. Honing plate an oil can. Packed in a box.

Streamlined standard equipment incorporated with latest technology for cutting serial sections in research work. The precise feed mechanism cuts sections from 1-50 microns in steps of one micron each. Feed Adjustment:- 1-50 microns. Total feed excursion 28mm with opening of object clamps 37x27mm . Overall dimensions 16x10x9” Complete with razor 120mm with back & handle plate. Object holder set of three oil can. Packed in a wooden box.

Most elegant and sturdy, latest in the range of Microtomes. Complete with counter balancing
Wheels, automatic feed mechanism and feed release. Light alumiPSAWm cover hinged at back,
Protects the internal mechanism. Heavy casted base plate fitted with heavy rubber pads to
Provide better grip. Smooth operation for uniform serial sectioning adjustable from1 to 50 microns
In steps of 1 micron. Feed mechanism independent of other movements. Supplied complete with
One knife, having back and handle in wooden box, 6 block holders, honing plate wit abrasive
Powder, one bottle of lubricating oil and Rexine cover.

It provides a rapid and easy means for the sectioning of natural tissue from 2 to 20 microns in step Of 2 microns without distortion for high quality microscopic examination. Section have the Resolution of cytological details required for pathological diagnosis, histochemistry, fluorescence, Biochemistry, microscopy etc. Technique is simple and easy to learn. To withstand condensation Inside the chamber, inbuilt Rotary Microtome is made of entirely rust-proof material fitted with anti Rool device to avoid curling of sections. Plastic plate is adjustable in all directions. Cryostat Temperature ranges up to –30°C as selected by imported thermostat and maintained by Hermetically sealed compressor system. Dial type thermometer indicates actual temperature of the Chamber.
Inner Chamber is made of thick gauge stainless steel. Clear plastic cover, slip in type , at front opening suffices for working access to micrtome. Small fluorescent tube lights is fitted inside the chamber which switches on automatically whenever plastic door opens to facilitate easy visibility. Microtome hand wheel provided outside the chamber in right hand side for easy operation. Control panel included Thermostat control, temperature indicator i.e. dial thermometer automatic timer, pilot lamps, line indicators and voltmeter, which indicates the incoming voltage. Cabinet is of heavy steel with enameled exterior finish. Four castor wheels at bottom easy mobility for use in various locations and for storage when not in use. Supplied complete with rust-proof in built microtome, forced air refrigeration unit, transparent door, door cover, four demountable specimen holders, one bottle of low temperature oil and one microtome knife 120mm long with back and handle in wooden box, cord and plug. Suitable to work on 220V, single phase, 50Hz, AC supply.

Specification as above but Cryostat is provided with SOLID STATE TEMPERATUE CONTROLLER –CUM-DIGITAL INDICATOR and is maintained within ± 2°C of set temperature. Besides this MICROTOME CRYOSTAT AUTOMATIC”DELUXE MODLE” also incorporated Automatic Defrosting system, and delay timer. Control panel includes digital temperature indicator cum controller. Defrost timer, main switch delay Timer and cooling indicator and voltmeter. Supplied completer with rustproof in build microtome forced air refrigeration unit, transparent door cover, four demountable specimen holders, one bottle of low temperature oil and one microtome knife 120mm long with back and handle in wooden box, cord and plug. Suitable to work on 220V, single phase 50, Hz AC supply.
OPTIONAL:-
1) Voltage Stabilizer (3KVA)
2) Block Holder
3) Low Temperature Oil.

Automatic micrtome razor sharpener with electric timer coupled with simple operation for razor Up to 180mm on both the wedges. Working mechanism encased in alumiPSAWm cover and front Portion covered with clear Acrylic canopy to observe safe and dust free honing. Complete with
Honing plate & dust cover.
OPTIONAL:-
I. Micro Coarse & Fine Abrasive (Set of two bottles of 200 gm each)
II. Spare glass plate.
III. Spare knife holder.

The unit is fitted with assembly for perfect cutting edge of the knife of any size up to 300mm Automatic reversing of the knife takes place at regular intervals for equal bevel angel on both sides of its edge, and the sharpening process is across the full diameter of the rotating plate. The plate is rotated at a constant speed by ¼ H.P. motor. A lubricant reservoir with clamp needed for grinding and polishing is supported o the top. The ground glass plate is of size 500mm. (dia) x12m.m. (thick). A metal scale graduated from to 0 to 25 degree division indicates the exact angle between plate & razor with dust cover and cord and plug. Operates on 220/230V AC. Fitted with 0-60 miPSAWtes timer.
OPTIONAL:-
I. Micro Coarse & Fine Abrasive (set of two bottles of 200 gm each)
II. Spare glass plate.
III. Spare knife holder